Navigate to SWAN > TEAM LINKS Under the LINK1 section: LINK PATH – Select the INTERFACE the user wants to assign to LINK 1 (ex. WAN,WAN2,4G LTE,MyFi2G,MyFi5G) Description – used to be edited accordingly and give the user a hint of the ISP used for the...
Navigate to SDWAN > QoS Type in the URLs, IPs, Ports, Networks, etc to all CLASSES of the QoS that the user wants to prioritize traffic of. Note: Traffic from CLASS 1 comes first than the traffic from CLASS 2, CLASS 2 first than CLASS 3, etc. Support usually adds...
LAN Jump is an RRT Service that allows the user to access the UI of a device under the RRT on ports 443 and 80 given that it is enabled on the LAN device. To enbale, navigate to SDWAN > LAN JUMP Edit the DESCRIPTION for the desired name for the device to be...
Navigate to SDWAN > ETHERNET PORTS AND VLANs Under the ETHERNET PORTS section, set the MODE to TRUNK PORT 1,2,3 Hit SAVE SWITCH CONFIG Under the LAN VLAN CONFIGURATION section, click on the EDIT to modify the already existing VLANS. Edit the NETWORK field for the...
Navigate to SDWAN > ETHERNET PORTS & VLANS. Under the LAN VLAN CONFIGURATION Section, click the EDIT button of the interface (LAN, LAN2, LAN3) the user wants to set up. Edit the IPV4 ADDRESS field to the subnet preferred by the user. START and END set the range...
